Messages

1

General discussion forum / rrc-1258mk2 ic-7100 Stopped??

« on: 2019-04-02, 11:05:20 »

Hello!

Have anybody same problem .. so ... my ic-7100 lost kontact to rrc, i changed rrcīs mainboard but problem is still on ... if i use rrc nano it notice some kind of "time out" but i can find that setup??? normal remote vorking mode it only stop, seems like radio is still on but nothing happens and rx is off. After shut down or new startup (radio cobntroll on/off button) it works fine few ten minutes ... and same with nano.

de Jari L oh3krh

2

Configuration, RRC 1258 / ft857 startup problem.

« on: 2018-12-06, 12:03:14 »

first startup is ok .. then i shutdown radio on/off itīs ok .. BUT .. next time when i try put radio on only leds goes on in RRC 1258II .. i must take power off at radio part rrc 1258II and then it works only one time ... so if someone knows what to do itīs fine ..

tnx de Jari oh3krh

3

General / Re: RRC nano kenwood & android 8.0 is not working?

« on: 2018-08-05, 16:07:11 »

and when i touch "connect" it seem to be ok and connected ... no rx, no tx ... before hard rain i used samsung s7 and everything fine but now i got Nokia 7 plus with Android one ver 8 oreo and .... iīm angry.

de Jari oh3krh

4

General / Re: RRC nano kenwood & android 8.0 is not working?

« on: 2018-08-05, 15:55:30 »

Hello ... i have same problem with android 8 but works fine with android ver7.     

de Jari oh3krh

5

General / rrc nano icom missing!

« on: 2018-05-22, 16:41:26 »

Hello!
 I got new phone and try to find rrc nano icom at google play but itīs missing .... why???
I bought licence pay few months ago .. so if that icom soft is gone i like to get my money back.

or is it only my problem and i donīt find it?

best 73 de Jari OH3KRH

6

General / With ic706

« on: 2018-04-09, 05:30:08 »

Hello .. i find old closed topic of ic706 audio problems but after 3 years is it any change to get ic706 works with nano... now i use ic756pro3 but vfoA and B with split operation dont work ..

Best 73 de Jari Oh3krh.

7

Configuration, RRC 1258 / rrc 1258mkII and ic756pro3

« on: 2018-03-03, 23:47:22 »

Hello .. i try to make this system work but i donīt knov whatīs vrong .. rrc nano icom works almost perfect (b vfo donīt work) but remote unit sometimes ptt works but thatīs all .. i use usb rs232 .. my units are made for yaesu and works perfect with ft857 ... i made changes like manual says but

de Jari OH3krh