Messages

1

General discussion forum / Re: TS-480 Freezes..

« on: 2020-02-23, 23:49:44 »

Ok I sent you my email and when I get it I will definitely look it over. Thanks again Mitch!


Sent from my iPhone using Tapatalk

2

General discussion forum / Re: TS-480 Freezes..

« on: 2020-02-23, 23:45:05 »

Oh boy..I wouldn’t know how to do that and now I got it running I really don’t want to touch anything..As you can see I’m not too computer savvy. I do have the RemoteRig running with Dynamic DNS if that helps


Sent from my iPhone using Tapatalk

3

General discussion forum / Re: TS-480 Freezes..

« on: 2020-02-23, 23:40:13 »

Also just to let you know that when I changed the 80 port from UDP to TCP I have not had any skips (drops) with Control RRC for over an hour. So far so good!! Thanks again Mitch and the best of 73!


Sent from my iPhone using Tapatalk

4

General discussion forum / Re: TS-480 Freezes..

« on: 2020-02-23, 22:59:56 »

Thanks Mitch. I fixed the problem! I had to switch the Radio RRC IP address. For some reason the 228 wasn’t registering the 13000-13002 ports. I also switched the 80 port from UDP to TCP. Hopefully that was the problem. Thanks again Mitch for all your help.


Sent from my iPhone using Tapatalk

5

General discussion forum / Re: TS-480 Freezes..

« on: 2020-02-23, 03:54:47 »

Mitch I have a problem! I tried to use an extender in shed to enhance the WiFi and in doing so I changed the RRC Radio IP address to connect the Radio RRC to extender. I erased the original port forwarding Cmnd/Aud/SIP-13000/13001/13002 to enter the one for extender and it didn’t work. When I tried to re enter those ports on the Router it says they are in use and doesn’t take the 13000/01/02 ports. I just screwed the whole thing up. What can I do to get those ports forwarded?


Sent from my iPhone using Tapatalk

6

General discussion forum / Re: TS-480 Freezes..

« on: 2020-02-21, 18:15:45 »

I will try it and will keep you posted! Thanks again and 73

7

General discussion forum / Re: TS-480 Freezes..

« on: 2020-02-21, 16:03:55 »

Maybe I should explain my setup. I have the Radio RRC a few miles away. Main Radio and Radio RRC is inside shed next to house and is connected to router via WiFi with a -62-67dbm signal strength. The Control RRC is located at home QTH. Both RRC’s are being run on same “Frontier” Internet Service but have different routers of the same brand. Wonder if the UDP cmnd status being just “ok” (44-45) is the problem?

8

General discussion forum / Re: TS-480 Freezes..

« on: 2020-02-21, 14:54:17 »

Thanks for the reply Mitch. I was totally focused on the Radio side and not control side. This morning I unplugged the Ethernet plug from Control RRC and tried it with just WiFi ((solid signal)) and audio seems to break more often. Noticed the UDP cmnd status says “OK (45)” and not “Excellent (60)” like the RTP status. Could that be the issue? It has to be something minor because it does work just with this slight problem. Love the RemoteRig! I’m finally back on the air here at home! Thanks for your help Mitch! It’s appreciated by all on forum.

9

General discussion forum / TS-480 Freezes..

« on: 2020-02-21, 04:07:02 »

I am using a Kenwood TS-480 and it works great for a couple of hours then it freezes with power and no audio or control over any buttons. During the hour of working with it I get some audio drops ((Barley Noticable)). My Wifi signal strength where RRC-Radio is located ((Over Wifi)) is a -60 to -67dBm which should be OK for this application. My RX Jitter Buffer size is ((4)) Jitter Delay is ((3)) and Audio Packet Size is ((20)). Is there something I can do to prevent this from occurring so I can have non stop delays using the RemoteRig?