Messages

1

General discussion forum / Re: RRC-MICRO, TS-480, HRD, DM780

« on: 2011-08-04, 16:49:09 »

Hi Mitch,

tnx for your reply.
I'm using the RRC-PC client.
Yes I use HRD PTT and it works, but PC client only switch from RX to TX (allowing input from microphone) when you press the red ptt botton.
So we need 2 PTT syncronized: one on PC client (and this is the question) and one on TS-480 (it works fine via HRD PTT).

'73 de Piero IZ1ERR

2

General discussion forum / RRC-MICRO, TS-480, HRD, DM780

« on: 2011-08-04, 13:58:18 »

Hi all,

I have a setup based on RRC-MICRO on client (PC) side, RRC-1258 on the remote (RADIO) site, the radio is TS-480.
All is working fine about SSB qso, using HRD to control the TS-480, andio and PTT all ok.

Now I'm trying to use DM780 to make PSK qso.
I'm using the internal sound card of the pc connected with the 2 connectors (mic, speakers) of the RRC-micro via 2 audio cables, the audio is OK.
DM-780 is configured to use HRD to control the PTT and when I transmit, the PTT on TS-480 works.
The problem is that I also need to push the red botton on the RRC-PTT to enable the PTT on the RRC-MICRO side.
Is there a solution for this problem ?

Thanks.

'73 de Piero IZ1ERR