No reconnect

[DM1CG]

Hy all

I have tested the weekend much with TS-480 .

I found out, sometimes I canīt RE POWER ON the Station ,after power off.
Inside the home network all is running fine .

If i didt can re power on the Station the yellow LED da AUX / MIC is blinking.

By rest my ADSL Router / get a new IP Adresse I can re Power on the Station again.

any one know the problem

best 73 de Carsten

[dj0qn]

hallo carsten,

bitte eine mail direkt an mich senden: dj0qn (at) darc.de und ich kann dir bestimmt helfen.
bitte das problem in der mail nochmal beschreiben.

73,
mitch DJ0QN

[DM1CG]

Hy Guys

I tested more and I get again it.
I take an other UNIT RRC 1258 - client side - FW 2.68
Make the setup like my Control Unit

Over the WEB interface I make 10 -15 Connect - Disconnects with a break around 10sec.

Now a got no connects more. I produced an SIP Error. I am not able to do an conenct again.
Now I have to swap my public IP adresse .. on that place I have a fix one. :-(


Name   Value
Control panel   OFF
Radio   OFF
Connection status   Disconnected
SIP status   Unknown(1)
Last SIP error   SIP Error
RTP/UDP audio status   Disconnected
UDP cmd status   Disconnected
SIP command timeout   4
Rx Jitter buffer size   4
Rx Jitter delay   3
Dual Rx   0
SIP Out port   11060
SIP In port   11060
Audio Out port   11050
Audio In port   11050
Command Out port   11040
Command In port   11040
External SIP In port   11060
External Audio In port   11050
External Cmd In port   11040
Other party   IP ADRESSE
Input 0   High
Input 1   High
Input 2   High
Output 0   High
Output 1   Low
Output 2   Low
DNS status   OK,
Active profile:   DM1CG
PTT status:   OF

[DM1CG]

Yesterday at Remote side I get the same Error.

I was inside the same IP network !
I made one connect - working some W Station on 10m.
Power off the station... repower -> SIP ERROR.

I give the control unit another IP , but same SIP ERROR.

Disconencted the power supply at the radio side and i can connect again.
One Time -> SIP Error

?
Best 73 de Carsten