Profiles ?

[DM1CG]

Hello all

my RRC1258 V1 didnt save the differnet profiles.

What is the right way to save differnt settings for the Profiles.
Is it possible to change the profiles via setup manager software ?

bets 73 de Carsten
DM1CG

[Jan (Microbit)]

Just change profile and then modify the settings as you normally do it. When you click "Apply" the changed settings will be saved in the currently selected profile.

Yes, you can change profile from Setup Manager.

[dj0qn]

To make sure that Carsten's questions are answered:

- You must first change to the profile, THEN save it using export. If you have
multiple profiles, you need to change to each one in turn and save them individually.

- To change the profiles in Setup Manager, go to the "setup" tab. It is on the right.

73,
Mitch DJ0QN / K7DX

[Jan (Microbit)]

Mitch,

It seems we have a different understanding of the questions Carsten have. I thought he was unable to just internally save the settings when using a different profile, while you are talking about exporting 

[dj0qn]

Yes, Mike, that is the problem when one writes in a language where they are not a
native speaker. I receive quite a few direct e-mails in German and help them out,
but if someone writes on the forum in English, it may be misinterpreted. The Nordic
region is at an advantage, since they can write in Swedish as well as English ;-)

73,
Mitch DJ0QN / K7DX

[DM1CG]

Thanks both

:-) running now.