Firmware 2.76 and IC-7100

[DH8AAA]

Hallo,

I upgrade my IC-7100 control Unit (with W-LAN modul ) to Firmware 2.76.
After ca 5-10 minutes the Controller restarts, then it works for ca 5 minutes and restart again..... and so on.

After downgreat to 2.75 the unit works fine.

73
Oliver

[Jan (Microbit)]

That does not sound too good 

Does it restart even if the controller is not connected to the radio RRC?

Are you using the WiFi connection? If yes, did you try using Ethernet(wired)?

[DH8AAA]

I use the WiFi with my IC-7100.
I donīt know if the controller restarts or lost WiFi connection.

My TS-2000 with Lan connection works fine with Firmware 2.76.

73
Oliver

[DH8AAA]

Now i have update my TS-480 equipment (with WIFI) to 2.76.
It works fine too.

73
Oliver

[Jan (Microbit)]

I see. Do you use the same WiFi access point for the TS-480 and the IC-7100 equipment?

[DH8AAA]

Yes, it is the same.

[Jan (Microbit)]

Can you check "Uptime" on the "Info" page and see if it resets(=gets a lower time than before the "restart")? If Uptime continues to increase even after the "restart" then the RRC is not rebooting itself.

[DH8AAA]

The new FW 2.77 solves my Problems.

Manny thanks for the good support.

73
Oliver

[Jan (Microbit)]

Great! We thought it would, but wanted to have you confirming it since you had problems. 

[DH8AAA]

Hallo Jan,

i have downgreat to 2.76 and the Problem is back.
After 3 mins uptime the box restart. The uptime Counter beginns new.

73
Oliver