Running an IC-706 with remoterig. Sometimes it connects, sometimes it doesn’t. No pattern to why it does or does not connect. If it works, everything works correctly, and stays on as long as I want. If not, no telling when it will decide to connect next.
Status when there is a problem, always indicates UDP cmd problem, sometimes with RTP/audio problem, at other times the RTP has connected and the UDP cmd has not. Sometimes the yellow light comes on, but no display or audio. At other times, both the red and the yellow light come on.
Radio end is on an LTE modem with a fixed IP address. The port forwarding is properly set, because when it works, it works perfectly. If that were the problem, it would never work. Connection speed is good, in the 15Mbps range. Control side is on house LAN (fiber optics), connection speed in the 70Mbps range.
Have checked and rechecked all the wiring. No physical intermittents that I can find.
Pressing the power button is always a gamble. Will it work this time?
Any ideas out there?