Yaesu FT-991 power on remote control

[EB2AQH]

Hi all,
I have connected my FT-991 via RS-232 COM 2, data, audio and PTT OK
Only thing still not working is switching on my radio on remote when starting Ham Radio Deluxe PC software. I must switch on FT-991 manualy (asking my wife to do it at home) and after that start HRD on my laptop conected with RRC-Micro PC client.
Exiting from HRD switch off radio OK.
Configuration menu on RRC-1258 MkII: Radio avanced setting Yaesu power-on/off   is set to Yes.
Can you help me?
Thanks in advace.
73's
Iņigo
EB2AQH

[sm2o]

What happens if you use the PC program from Yaesu  for FT-991 ?

The power on command should be included in the PC-control software, it's nothing that Remotrig should do.

73 de mike

[EB2AQH]

Sorry but perhaps I didn't explained very well.
When HRD start first try to communicate with RRC-Micro PC Client virtual comport. If radio is already turned on everything go OK and HRD start working as normal. But if radio is switched off HRD connect with virtual com port and try to switch on radio but after several tries process fail.
In local HRD can switch on radio when software start with no problem.
Thanks.