I travel frequently and encounter very good, and very bad levels of internet connectivity. In most cases, dropout, latency and jitter are the greatest issues. I have researched the list archives attempting to define settings which can be manipulated to reduce performance issues caused by 'poor" internet service.
Given discussions on this forum, I have selected some of the setup parameters that may be manipulated to better tolerate internet based issues. I would be interested in learning what other forum members use for settings on these parameters. For example, Key delay ms [0-250] is defaulted to 80 in my initial setup. Recommendations on this forum have recommended using the maximum setting (240ms) for poor internet issues.
I do not have the technical expertise to understand how all the parameters below affect the RemoteRig remote station performance. Hopefully responses to this post will help me, and others.
Many thanks & 73 from Andorra
Dennis, K7FL
Software 2.91
Bootloader 1.10
Compiler 4.6.2
Build Jun 16 2016 07:13:13
Auto connect 0
Audio quality 0
Audio dual-rx 0
Codec out gain 255
Codec inp gain 0
Codec inp HPF Hz 3
Codec inp preamp 1
Codec inp attenuation 0
Rx jitter buffer size 12
Rx jitter delay 10
Audio packet size (ms) 20
Lf delay ms [0-500] 50
Key delay ms [0-250] 80
PTT activated by Keyer 0
PTT tail delay ms [0-999] 0
Rx Jitter buffer size 12
Rx Jitter delay 10
Dual Rx 0
Current audio packet size 20
Current audio quality 0 - alaw 8 kHz
<<<end>>>
