TRX Manager - CW problems

[I4GAD Enrico]

I'm a quite happy user of a TS-480 (+ Expert 1K-FA) in remote mode, thanks to the RRC controllers.
Time to time, it would be nice to use my rig also when I have not with me all the needed hardware (RRC Box & TS-480 Front Panel) using the RRC 1274A and the software client.
I succeded to install and run it, but I'm still having some problem.
First of all, I'm very anxious to replace HRD control Software with TRX Manager as soon as it will be fully supported by the RRC Client. Is there any progress in the matter ?
I'm using the Software Client 1.3.1 (but also 1.3.0 Beta 2 is the same) and I have some problem with HRD, that seems to respond with big delay to any stroke of the mouse. I feel not safe in split operations and the overall response of the application do not satify me;
I use to work with TRX-Manager for remote control of the antenna rotor and the Steppir contoller sincronized with the tranceiver frequency , by far much better end closer to the standard way of operate an ham rig than HRD. Unfortunately do no work yet with the RRC Client.
I'm also having some problem with the software CW keyer: many letters are repeted in a random way while I'm keying on the keyboard. Does any one else experieced similar problems?
When I use the RRC Control Box and the TS-480 Panel, everythink works perfectly.
Best regards to all.
Enrico I4GAD

[roland]

Hi Enrico.

There is still problems with the TRX-manager. I have contacted the developer of TRX-manager and we are trying to work out something. Currently that configuration only works halfway's. Commands sent from TRX-manager to the Radio works OK, but data from the Radio to the TRX manager is lost somewhere between the serial-driver and the TRX-manager.

This leaves us in a kind of 'half works' situation, which we hope to solve. Can't give any time plan for that however.

[I4GAD Enrico]

Thanks Roland ! I hope you'll succeed in the problem fix and get a full TRX Manager support.
Have you had any evidence of the CW manipulation problem notified in my message ?
Best regards.
Enrico I4GAD