The PTT works fine in SSB and CW, but using the configuration described in the manual with MMTTY and RRC1258 COMFSK installed and showing connected to COM3, there is no PTT generated when MMTTY is sending.
MMTTY PTT & FSK is set to COM3, Tx Port to COM-TxD(FSK) and USB Port to "C".
In RRC Radio, OUT0 Mode = I/O, OUT1 Mode = Baudot/45, OUT2 Mode=Keyer
In RRC Control, IN0 Mode = Keyer, OUT0, OUT1, OUT2 Mode = I/O, both USB settings are disabled.
Software is 2.46
I can manually trigger PTT using the normal mic PTT. Can anyone tell my why PTT won't key from MMTTY?
Thanks,
Ron
N6IE
