Hello Group ,
I am using RRc between my home and remote qth . I am keying remote FT950 via I/O on Control and radio side . Had no issues for 2 years but suddenly I am getting permanent Tx of the remote rig when the I/O RJ 45 followed by 6 mm Key cable (tip and ground ) is inserted on the back or front cw keying plug on the FT950 .
Took radio RRC home and just found out that when the miniusb is connected to the RRC miniusb plug in the front , the rig is going in TX . Never had this before and did not update SW lately .
SW is Ver 2.87
Any help please ? Thank You ,
Best 73 , Jim ON4DS ( ex ON5UM )
