Please help with RRC setup.
I have a K3 (upgraded with KIO3B) and K3/0. I have not been able to connect the K3/0 with K3 using the RRC units. Here are the copies of the status pages:
Remote:
Name Value
P5.2 OFF
Connection status OK
SIP status Connected/transfering
Last SIP error None
RTP status Excellent(60)
UDP cmd status OK(16)
SIP command timeout 0
Rx Jitter buffer size 4
Rx Jitter delay 3
Dual Rx 1
Current audio packet size 20
Current audio quality 2 - Linear 16 bits 8 kHz
External IP 192.168.1.170
SIP Out port 13000
SIP In port 13000
Audio Out port 13001
Audio In port 13001
Command Out port 13002
Command In port 13002
External SIP In port 13000
External Audio In port 13001
External Cmd In port 13002
Other party 192.168.1.169
Other party(mac) 00:1e:fd:01:92:30
Input 1 High
Input 2 High
Output 0 Low
Output 1 Low
Output 2 Low
Dynamic DNS status Unknown
Ping status (watchdog) Off
DNS status OK, remoterig.com = 213.180.92.125
Active profile Default
PTT status OFF
Antenna-Switch (IP) not connected
Common network settings Yes
Control:
Name Value
P5.4 OFF
Radio OFF
Connection status OK
SIP status Connected/transfering
Last SIP error None
RTP status Excellent(60)
UDP cmd status OK(31)
SIP command timeout 0
Rx Jitter buffer size 12
Rx Jitter delay 8
Dual Rx 0
Current audio packet size 20
Current audio quality 2 - Linear 16 bits 8 kHz
SIP Out port 13000
SIP In port 13000
Audio Out port 13001
Audio In port 13001
Command Out port 13002
Command In port 13002
External SIP In port 13000
External Audio In port 13001
External Cmd In port 13002
Other party 192.168.1.170
Input 0 High
Input 1 High
Input 2 High
Output 0 High
Output 1 Low
Output 2 Low
DNS status OK, remoterig.com = 213.180.92.125
Active profile Default
PTT status OFF
Common network settings No
All my cabling is in place except for the I/O on the remote site.
I do not know what p5.2 off, p5.4 off and radio off mean.
Any help appreciated.
Thanks,
Raj, N2RD
