Gentlemen,
I could use some help please. I have a TS-2000X, the RC-2000, two Lynksys WRT54GL wireless routers that are flashed with DD-WRT Version 23 SP2, and a fresh set (two days old) of RRC-1258MkIIs. I am very excited about getting these working, but I know very little about the networking side of things. Here is what I have done so far. My home internet is DSL that comes in the house and goes through a DSL modem to a Linksys WRT54GL wireless router (flashed with DD-WRT), then to a four port Linksys BEFSR41 router, then to a 16 port switch. I was able to get the Web Browser to see both RRC units at the 16 port switch level, but no control of the radio.... finished this about 1:00am in the morning. The next day I moved the RRC units to the Linksys wireless WRT54GL router and was able to get everything to work just fine, I can control the TS-2000 with the RC-2000 with both RRC units pluged into the 4 port hub of the wireless router.
Does this mean that is was working through my dyndns-free.com?
I then took the Control RRC and hooked it up to another Linksys WRT54GL and I am trying to get it to work from about 10 feet away. I know that I have to change some settings, but I do not know what to do and I have read the manual many times and researched the forum for many many hours and my head is really spinning now that I am not coming up with a procedure that makes any sense. Did I say that I am not a network guy? All of my success has been from trial and error.... with lots of errors.
What I need is for someone to help me finish this up. I am not sure what to do next. I can see the Control RRC on the second wireless router with my Web Browser and Mirobit setup manager. I can change settings, but I am LOST now!
Looking for help soon!
Greg WQ0P
I would gladly give my phone number out if someone thinks they can walk me through this.....!
