Yaesu FT857 not vork

[iw1gap]

Hello, I am Iw1gap, Andrea and live near Turin.
I'm trying to run the machine YAESU FT 857 with the RRC-1258.
I created all cables described from page 122 to page 125, Rev. A20 manual but nothing works.
I tried the remoterig 1274A, receive and transmit without radio control.
I tried to follow the instructions to interface with HRD, but I can not make it work.
I did downgrade the firmware to the version released in December ... I do not know what to do ...
The settings followed are those marked on p. Manual Rev. 127, A20.
Can anyone, please, help me?

Many thanks.

Andrea
http://server.radio.it

 

[sm2o]

if you use the A20 manual you should look at the settings on page 121. Program mode should be 3 for FT-857 and stop bits should be 2. If you check the latest manual you can see that you can use the FT-857 with detached control panel, like the IC-706, TS-480 etc.

73 de mike

[iw1gap]

Hi,
thanks for your reply.
Yes... pg.121, program mode 3, stop bits 2.
Also right on your observation of the new control panel removable.
But I use these devices with multiple configurations ... TS2K, IC-2820 does not seem appropriate to make hardware changes.
For this reason I ask if anyone has experienced the expected configuration from the manual.

Thanks

Andrea IW1GAP
http://server.radio.it

[sm2o]

It's nothing strange with the configuration described, I have tested it my self, but you have to use the right settings both in the RRC:s and in the Radio. And of course the cables and strappings are important, I don't understand what more you ask for

/mike

[iw1gap]

 
All right, It work!!!!!!!
SIP Autoconnect... Yes and no NO,
It work with RRc to RRc&HRD.

With REMOTERIG 1274A I am not able to make it work.
COM0 on RRC
COM0 on 1274A, Mode 4, COM50 (same com on HRD)... nothing
I also tried to simulate a 2 com ... then with 2, 4 mode, com50... nothing
use usb com port menu ... I do not see on radio menu...
Any help please?
Many, many, many thanks

GAP

[sm2o]

email me the ip and login info to your radio RRC. I will then connect from here and email you the settings

73 de mike

[iw1gap]

Hi,
i have sent my data...
tnx
bye

[iw1gap]

Hi,
I post the RRC-Microclient question on dedicated forum :-)

TNX

GAP