Author Topic: TS480  (Read 7339 times)

oe3cfc

  • Newbie
  • *
  • Posts: 7
    • View Profile
    • Email
TS480
« on: 2012-12-21, 18:39:47 »
 >:(Hello
Please help me!
Config: Kenwood TS480 RRc 1258MKII,2.62 Software, serial 4936, VDSL

Since April the Remote goes very very well, no Problems no Failure.
This week i change the Station from the gartenhouse ( 10 degress under 0  to a warm place !!! (7 Grad Celsisius)
And now the question???
The same  Internet connection, the same cables all the same but now i can not turn on the Control Panel from the TS480 on the Remote QTH, direkt i can an turn on ???
Please can anybody help me???
many thanks
73 de OE3CFC
chris

sm2o

  • Administrator
  • Hero Member
  • *****
  • Posts: 3041
    • View Profile
    • sm2oan
    • Email
Re: TS480
« Reply #1 on: 2012-12-21, 19:46:14 »
I don't recomend tu use the either the radio or the Remoterig box at temperatures below 0. I have my own remote station in a cupboard, isolated and with a heater which keeps the temp no lower than 10C. If you move a electronic equipment from -10C to 20C a lot of moist  is created in the box, connectors etc. which can cause trouble. It's not much else to do than try do dry everything up.

73 de mike

oe3cfc

  • Newbie
  • *
  • Posts: 7
    • View Profile
    • Email
Re: TS480
« Reply #2 on: 2012-12-22, 18:31:15 »
 ;D many thanks mike
i have change my Remote station to my home and search and find the failure.
Its not the temperature (now i have on the remote qth 7-8 Degrees)the fail  was the Baudrate in the RRC,she  was not 57600 Baud.
Than i transfer the Station on Remote Qth an it,s work again very very fine.
Thank,s Mike
Best 73 to you and your Family
Merry Christmas an a happy New Year
from OE
de OE3CFC   Chris :D