Remoterig with IC-7100 and digital mode info????

[IZ8GUH]

Hello guys,
someone remotized remoterig with an IC-7100?
Now without remoterig I use digital modes with usb cable,
radio directly on your computer.
Using Remoterig, front and divided body, how you can make the
digital modes (PSK etc ...), it takes on purpose cables or interfaces?
I have not found a configuration diagram remoterig with this radio
and are in the process of buying remoterig MKII. Where can I find
a guide for setting the internal jumpers of the boxes.
Thanks in advance.
73 de IZ8GUH Cristian

[oz1rh]

Though I have not tried yet I have understood you have to feed the audio from the IC-7100 control head to your pc for instance trough a SignalLink.

This is not smart, it would be much better if the digital audio inside the control RRC-1258 could be feed to the pc trough the USB cable, that is the RRC-1258 should appear as an USB audio device to the pc just like the RRC-Micro.

73, Palle, OZ1RH.

[IZ8GUH]

Thank you for having responded to me,
I would understand if you practice you can do through remoterig PSK and digital modes with the PC I have with me and the front panel.

73 Cristian IZ8GUH.

[sm2o]

Hi

You have to connect the analogue audio signals, there is no support for audio via USB for the moment.

73 de mike

[AE4S]

It has been a long time since this discussion concluded. Has anyone found a method for PSK operation using IC-7100?

Someone (above) mentioned sending the control RRC audio directly into the computer microphone jack or through a separate sound card. Assuming this will work for receiving audio, I do not see a way to send audio back to the transmitter except possibly through the Microphone jack in the control head.

I am already using COM1 and COM2 for Ham Radio Deluxe and rotator control, respectively, by connecting the control RRC USB jack to the computer. But I can't find a way to send and receive audio using the IC-7100 USB jack.

Has anyone found a way in the two years since this thread began?

73 de wfjordan

[oz1rh]

I feed the audio to and from my IC-7100 control head to my pc trough a SignalLink and I can do remote PSK31 and other digital modes this way. I strapped the SignalLink to match the RJ45 mike in/output of the IC-7100 control head comparing the manuals of the IC-7100 and the SignalLink. Read about SignalLink here www.tigertronics.com/slusbmain.htm

73, Palle, OZ1RH.