Using Signalink with HM-133 adapater with Icom 2820

[wd8aww]

Attempted a few times to get digital soundcard function feeding the microphone input of an ICOM 2820 with HM133 adapter using Signalink and a standard Icom 706 jumper configuration (less audio to mic output on the signalink jumpers).  I'm able to trigger PTT but I don't get signal to the radio end for some reason.
Would appreciate knowing how the HM133 adapter may affect jumpers for Signalink or hearing a success story from someone with the same configuration.

[wd8aww]

Solved.  The ICOM 706 configuration of Signalink works fine using audio from the headphone jack, Packet Engine, and Hamscope.  Had issues still sending with AGW Terminal but could receive.   So seems to be more of a software issue.  Aux connector on Signalink can be used as passthrough of audio to speakers or headphones simultaneously.