Problem TS 480 keying ?

[dl5cg]

Hello User,

at the moment I have trouble with the CW keying on my TS480SAT.
Has anybody a config example file for keying ? Is it useful to chance any
parameter in the TS480 menu too ? But i think the keying process is only to
set in the control box ? The keying sound is now very hard and smeared. It was
clear earlier.

Many thanks for a good idea

Here can you see my actual keyer settings : http://www.dl5cg.de/aktuell/

73 Andreas DL5CG

[dj0qn]

Andreas,

Here is my CW checklist:

CW Checklist
------------------------------
on the radio RRC:
- under keyer settings, set PTT activated by keyer to YES
- under I/O settings, change OUT2 mode to KEYER

on the control RRC:
- under keyer settings, set enable to YES
- change other keyer settings as desired
- under I/O settings, set IN0 mode to KEYER

Make sure that the cable is connected between the radio RRC and rig's key (NOT paddle) jack. If possible,
use a mono plug on the rig side, since stereo can cause problems under certain situations (e.g. FSK).

73,
Mitch DJ0QN / K7DX