2 x K3/100 - no PTT

[DM1CG]

Hy all

the combination K3/100 <RRC> K3/100  have no PTT in my case.
Only the button XMIT set the remote K3/100 in to TXing.

PTT IN and the PTT at the Microphone did not have an effect.

I read several time - some had the same issuses but not solution.

I am using the settungs in the RRC UNits form the K3/0 mini - and that works with PTT
Both K3/100 transmit without the Remote Connection with PTT in / PTT Micro and Xmit

any Info ?

bets 73 de Carsten

[dj0qn]

Carsten,

The PTT is done in hardware through the red strappings in both RRC's. You need to check to
make sure that all are making contact and the layout matchs the type of microphone used.

73,
Mitch DJ0QN / K7DX