FT-857 To IC-7100 change over.

[GW6OVD]

Hi
I have been running my remote station for a number of years with with a Yaesu 857 and RRC1258 ver 2.91, a little unreliable but most of the time it worked.

I've recently changed over to an Icom IC-7100, made all the necessary mods and tested at my home QTH.  All working fine.

Took both units to my remote location, again all working fine on that network.

Tested with control rrc and head unit at home QTH but unable to connect.

ddns status both ends OK,
control rrc shows  Sip status "unknown 1"
last sip error shows "Sip error" when I attempt to connect.

Router at radio end all looks ok, radio rrc ip set up in dmz as with previous setup

When I enter remote router external ip in my home pc browser it takes me directly to the radio rrc but still cant connect via control rrc.
Any help would be greatly appreciated.

[sm2o]

Hi
send export settings (html) files from both units to support2remoterig.com so I can have a look
73 de mike

[Jan (Microbit)]

support2remoterig.com > support@remoterig.com ?

[GW6OVD]

Thanks for your help Mike, cleared all the remote router settings and re-installed same settings. Connecting ok now.   
73 Mal GW6OVD

[sm2o]

Great
73 de mike