Hi. I'm a user for almost 10 years, using an IC7100. Once I figured out port forwarding it's worked extremely well.
I getting ready for a road trip and I noticed the 7100 was "tripping " above 10 watts. I connected the base radio to a new power supply and that solved the problem. Except, and maybe a coincidence, I lost remote rig.
Even when connected directly via 192.168.1.228, using my pixel 9 (which was working fine before this), the phone seems to connect, but no radio functions. The yellow light on the radio 1258 (MKII) is solid.
Is it possible I accidentally changed a setting on the IC7100 that I don't understand?
Connection status OK
SIP status Connected/transfering
Last SIP error None
RTP status Excellent(59)
UDP cmd status OK(45)
SIP command timeout 0
When I connect via your server I get the same situation. Yellow light is solid, nano pro app looks like it's connected (I can turn the tuning dial), but no radio response.
Connection status OK
SIP status Connected/transfering
Last SIP error None
RTP status Excellent(60)
UDP cmd status OK(44)
SIP command timeout 0
Rx Jitter buffer size 10
Rx Jitter delay 5
Dual Rx 0
Current audio packet size 40
Current audio quality 0 - alaw 8 kHz
External IP 64.222.160.67
SIP Out port 13000
SIP In port 13000
Audio Out port 13001
Audio In port 13001
Command Out port 1025
Command In port 13002
External SIP In port 13000
External Audio In port 13001
External Cmd In port 13002
Other party 64.222.160.67
Input 1 High
Input 2 High
Output 0 Low
Output 1 Low
Output 2 Low
Dynamic DNS status OK
Ping status (watchdog) Off
DNS status OK, remoterig.com = 86.107.103.218
Active profile Default
PTT status OFF
Antenna-Switch (IP) not connected
Common network settings Yes
Hope I can get this fixed before I leave on 7 March.
73
Arnie W2HDI
