Fritz! |Box Fon SIP unblock

[sv5byr]

Hello all,
Im using a Fritz Router that uses the 5060 port for VOIP telephony. How to change the SIP port to another to avoid the blocking on port forwarding

TNX in Adavance Mike
SV5BYR

[dj0qn]

Mike,

Just go to the advanced settings and change the port under "SIP port". Make sure you change both RRC's.
See page 50 in the manual.

73,
Mitch DJ0QN / K7DX

[sv5byr]

Hello,
There is no Avdanced Settings no where Mitch on my Fritz..

[dj0qn]

Mike,

Not in the FritzBox, in the RRC's!

You then forward the new port in the FritzBox.

73,
Mitch DJ0QN / K7DX

[sv5byr]

Mitch my remote station is 85 km away and I have make already the port forwarding on Router at remote site for 5060 port. Now the only easy thing  is the SIP port change of Fritz Box Fon

[dj0qn]

Hi Mike,

Then I afraid that you must get in your car and take a drive if you can't configure your
radio-RRC and router remotely    

Port 5060 is the standard SIP port that is fixed in routers such as the FritzBox and can
not be changed. That is why my checklist I send to people who ask for it includes a change
to the RRC SIP port.

73,
Mitch DJ0QN / K7Dx

[ON4AOI]

Mike,
sorry you did not mentioned the problem when I was in SV5
a few weeks ago
could have been solved in little time

Guy ON4AOI